Skip to main content
Being a reef Keeper involves quite a bit of responsibility and discipline.

Monitoring levels and controlling them on a regular basis saves many problems.

Every reefer has there problems one issue i had was a massive outbreak of green algae, a massive problem and very difficult to get rid of. After finding it was down to negligence, it was my fault.

This made me realize i had to be more involved

It was down to high nitrates and lack of regular water changes that was to blame.
Now i am a changed reefer. Now i do a 10% water change weekly and now i have minimal nitrates and best of all no algae!

Having gone on ultimate reef forum i found that this is a big issue and many go through similar problem.

With this in mind i decided to post a thread on how to become a successful reefer, with very positive comments around the forum community.

To help me overcome the problems I've been having i decided to write a diary, to help me keep track of things that need doing and the things that I've done. So i decided on this blog so i can keep a log of stocking, corals, and probably most importantly checking the appropriate levels and share them with the reef community.

Here are my latest results

Salinity 1.026
nitrates 10ppm
phosphates 0ppm
alkalinity 7.0
Calcium 350ppm
Magnesium 1050


From these results my aim is to increase Alkalinity, calcium and magnesium slightly using suitable buffers.



Please feel free to add any comments, all are welcome.
Labels:

Comments

Anonymous said…
Yup, your Ca is a bit on the low side and you need to get it up to 420-450, but you also need to keep the Mg and alk in balance. Look to some of the forums (e.g. MFUK) for advice on how to do this more cheaply than using expensive buffers.

The low readings are due to the lack of water changes early on, the levels became depleted and weren't being topped up.

Is that a typo on the salinity?

Off to a good start, the tank looks good.
28 August 2008 at 14:26
Post a Comment

Popular posts from this blog

Vauxhall vivaro movano heater blower motor not working. How to fix, repair

So it’s a cold winters morning your frozen to the bone, you jump into your vauxhall vivaro and turn the heaters on, it doesn’t work. In this article I will explain how to repair. There are commonly three things that can go wrong and it true to be said with most vehicles. These are the fuse, the motor, and or the heater resister. These should be checked in this order. Not only to keep costs down but is a good methodical way to solve the problem. A little contradictory but before you do anything just check if the motor works on any speeds at all. If it does, particularly the fastest speed. It safe to say the fuse and motor are working fine, and would probably mean that heater resister if faulty. If this doesn’t do anything you should grab the owners manual and locate the fuse. This can be checked visually by removing and looking at the fuse element or the use of a power probe and checking a power at both sides of the element. If the heater still doesn’t work, remove the motor a
3 comments
Read more

New V2 Auto top up from TMC

After needing an auto top up unit for some time, with quite high costs for a unit that function seems very minimal. I have always been put off until now. Whilst reading ultra marine I saw a review and advertisements for the TMC V2 auto top up and more surprising is it's very affordable price tag. After further investigation it seems to have really good reviews on forums and blogs. I have to say it is a real good, easy to set up and cheap unit that functions perfectly. This should give me more stability and time to enjoy the aquarium.I will in a few weeks report back any improvements that it will hopefully make.
6 comments
Read more

TDS and how to get it to zero.

Total dissolved solids, or TDS as it is otherwise known can be the cause of many problems. One of the main problems that it can cause, is nuisance algae like i have had. As you will know from following my blog, i have had major issues with Algae. The RO water with a TDS reading of 9 that was being used woud'nt have helped. So how do you overcome this? Get yourself an in line TDS meter to establish your TDS reading. This meter measures the water before the Reverse Osmosis and pre filter stages. It is not unusual for tap water to have a reading of 300. These meters also indicate the reading after the reverse osmosis process. As expected this should be zero. If like me you have a TDS reading above 0. You will be feeding the nuisance algae. Provided your TDS is quite low, for example around 10 you can be satisfied that your Membrane is in satisfactory working order. If higher or your RO membrane is a few years old you might want to consider membrane replacement. So your pre
5 comments
Read more