Skip to main content

TDS and how to get it to zero.

Total dissolved solids, or TDS as it is otherwise known can be the cause of many problems. One of the main problems that it can cause, is nuisance algae like i have had.

As you will know from following my blog, i have had major issues with Algae. The RO water with a TDS reading of 9 that was being used woud'nt have helped. So how do you overcome this?

Get yourself an in line TDS meter to establish your TDS reading. This meter measures the water before the Reverse Osmosis and pre filter stages. It is not unusual for tap water to have a reading of 300. These meters also indicate the reading after the reverse osmosis process. As expected this should be zero.

If like me you have a TDS reading above 0. You will be feeding the nuisance algae. Provided your TDS is quite low, for example around 10 you can be satisfied that your Membrane is in satisfactory working order.
If higher or your RO membrane is a few years old you might want to consider membrane replacement.

So your pre filters and membrane are all satisfactory you will find you still have TDS present The most likely cause will be that you don't use DI resin. This removes the last remaining dissolved solids from the water. To use DI resin you will need an additional pod for your RO unit. This is simply added to your Reverse osmosis unit after all stages, post RO membrane, and packed with DI resin. The result is zero TDS RO water. Simply refill with DI resin as soon as this reading rises.

My RO unit was a 4 stage unit  That i simply re-plumbed as follows.
  1. Tap water 
  2. pre filter
  3. carbon filter
  4. Ro membrane 
  5. DI resin
  6. RO TDS 0 water

A word on your shop purchased water. Please ensure this is checked and of cause as zero TDS. It is not uncommon for this have high readings if the shop doesn't regularly check.

Now provided you have 0 phosphates and  0 Tds water you should be algae free.

Comments

The Reefuge said…
Great read, thanks a lot!
Gareth said…
Your really welcome, this advice has helped me finally solve my algae problem.

This guide is the result of many hours and mixed views reading and seeking advice on reefing forums.
It is great advice. thanks
Unknown said…
I have read your article, it is very informative and helpful for me.I admire the valuable information you offer in your articles. Thanks for posting it..
water treatment chemicals
Unknown said…
Very impressive blog. Thanks for this wonderful post.
membrane filtration

Popular posts from this blog

Vauxhall vivaro movano heater blower motor not working. How to fix, repair

So it’s a cold winters morning your frozen to the bone, you jump into your vauxhall vivaro and turn the heaters on, it doesn’t work. In this article I will explain how to repair. There are commonly three things that can go wrong and it true to be said with most vehicles. These are the fuse, the motor, and or the heater resister. These should be checked in this order. Not only to keep costs down but is a good methodical way to solve the problem. A little contradictory but before you do anything just check if the motor works on any speeds at all. If it does, particularly the fastest speed. It safe to say the fuse and motor are working fine, and would probably mean that heater resister if faulty. If this doesn’t do anything you should grab the owners manual and locate the fuse. This can be checked visually by removing and looking at the fuse element or the use of a power probe and checking a power at both sides of the element. If the heater still doesn’t work, remove the motor a

New V2 Auto top up from TMC

After needing an auto top up unit for some time, with quite high costs for a unit that function seems very minimal. I have always been put off until now. Whilst reading ultra marine I saw a review and advertisements for the TMC V2 auto top up and more surprising is it's very affordable price tag. After further investigation it seems to have really good reviews on forums and blogs. I have to say it is a real good, easy to set up and cheap unit that functions perfectly. This should give me more stability and time to enjoy the aquarium.I will in a few weeks report back any improvements that it will hopefully make.
It has been some time since I posted on this blog. But with most things everything goes in cycles and though I should keep it going maybe not reef related but a great opportunity to save money and get cash back in a great fun way.   TopCashback   allows you to shop as normal but currently at time of publishing this post eBay are giving 4% cashback. All you need to to is click the  TopCashback  link  join and before making a purchase click through the cash back link on TopCashback and the money accumulates in your account. You then withdraw and spend it on whatever you like. There are hundreds of different shops and stores. It really doesn’t take long to accumulate. Some very well known businesses/brands give really good rates. You really could be buying those new lights, aquarium, pumps before you realised. And it’s probably most likely things you will be buying anyway.