Skip to main content

Why is my aquarium full of algae?

Nuisance algae is a problem many reef aquarists encounter. This article will point you in the right direction and more than likely by taking appropriate action to one of the solutions, your algae will disappear and never return. There are three main reasons for hair algae, these are listed in order of most probable cause.

Phosphates. This is at large the biggest cause of hair algae. The trouble with phosphates is that most aquarists check the parameter but because most test kits available are inaccurate they get false readings. Giving the impression that phosphates are at an acceptable level. The most reliable test kits to date are the Deltec phosphate test kit, but this is very expensive. The solution is very easy to solve. Use a phosphate adsorbing media such as rowaphos in direct flow in the aquarium. Using a inexpensive phosphate reactor for the media is much more effective and comes highly recommended. Either way ensure you change media every four to six weeks.

Water Movement. Water movement or circulation is very important, if not enough flow is available you will get "dead spots". Areas that have no circulation. Here is where detritus builds up causing high nitrates and phosphates, This is where your algae problem will start to grow and spread. The solution is either upgrade a current power-head or add additional movement through a second power-head.

Lighting duration. You will probably over look this since many corals need light to survive. But too long lighting duration and/or placement of aquarium near a window in the days sun will cause growth of algae. If you have no problems with phosphates or water movement i would recommend reducing lighting cycle and/or move aquarium, close a curtain to block sunlight during the day to see if algae growth reduces if an aquarium move is a massive task.

Total dissolved solids.TDS present in RO water or your saltwater mix will also contribute to algea. It is highly recommended to use water with zero TDS present. Always check, I have an inline meter that tells me as soon as it rises, when it increases I change the DI resin. You can read a little more into this in my Article TDS and how to get it to zero

Comments

Patrick Canella said…
Good post! I downgraded from a 20 to a 10, and I'm fighting with red slime algae at the moment. I use di water only, could that be the main cause? Or is it the byproduct of the move?
Al said…
I have definitely had algae grow in areas of low flow in my aquarium, can almost never have too much flow! Thanks for the post.
Gareth said…
Both these comments are correct and are almost always the reason for algae.
Nicole Martin said…
Aquarium needs maintenance and adds excellence to home as well as in life. To keep up its qualities EPDM Pond Liner Repair is vital.
Matt said…
The ocean isn't stagnant! keep the flow moving or there will be algae!

Popular posts from this blog

Understanding evaporation and top up

Many new Reef Keepers get confused and stuck when it comes to topping up water in their Reef Aquarium. It is really simple and easy to understand. It doesn't need to get confusing.

Evaporation happens continuously, many new hobbyists start by adding Freshly mixed saltwater then end up with a really high salinity. You have to think of your water as two elements, in fact it is. Salt and Reverse osmosis water. Salt cannot evaporate because it is a solid and solids don't evaporate. Therefore as the water evaporates, the salt remains in the Aquarium, which in turn increases your salinity. From this you should have worked out that Top up/RO water should be added.

If your Aquarium is left for a few days or more the salinity will rise rapidly, which is why it is important to top up daily if possible.

When carrying out a water change, because you are removing the mixed salt water your are removing both elements, salt and RO water. All that is required now is a fresh saltwater mix that…

The Reef Aquarium With Low Magnesium - What Can Happen?

Hopefully you will understand that keeping corals is a huge responsibility and can become very expensive to yourself and the environment. Corals are very interesting animals and unless you are willing to nurture them properly, you should find another hobby.

After checking the usual, Salinity, Nitrate and Phosphates. You should be checking Magnesium, Alkalinity and Calcium. These three parameters are very important when keeping short polyp stony,and long polyp stony hard corals, SPS and LPS respectively.

So what effects will low magnesium have on your reef aquarium?

You will find it very difficult to maintain high alkalinity and calcium levels if magnesium is low.

Corals will slow in growth and will cause some corals such as Duncans and torch corals to recede, and in some cases die. You may as many other reefers do, think you have something unseen and/or unheard of eating your corals, because branching heads or receding one by one. Don't get fooled by this, it more likely be the cas…

New V2 Auto top up from TMC

After needing an auto top up unit for some time, with quite high costs for a unit that function seems very minimal. I have always been put off until now. Whilst reading ultra marine I saw a review and advertisements for the TMC V2 auto top up and more surprising is it's very affordable price tag. After further investigation it seems to have really good reviews on forums and blogs. I have to say it is a real good, easy to set up and cheap unit that functions perfectly. This should give me more stability and time to enjoy the aquarium.I will in a few weeks report back any improvements that it will hopefully make.