Skip to main content

9 Unthought of Accessories reqiured for Reef Keeping

This article will aid you in the selection of some necessary items That you may not have considered to help keep a great looking reef aquarium. This excludes all the obvious hardware like pumps, skimmer, test kits and so on. You may well have some of these around the home, But I would recommend aquarium dedicated items to prevent contamination and unwanted problems.


  1. Algae scraper. This will allow you to keep the glass on the inside of the aquarium nice and clean, preventing you having to put your hands in and getting wet. Doing this regularly will ensure great viewing pleasure of your aquariums inhabitants.

  2. Turkey baster or similar. These are really cheap and can be found in many food utility shops. Not the most obvious choice of equipment, but these can be used for feeding corals and cleaning off live rock with a blast of Aquarium water every week or more.

  3. Small water Jug. These are really useful, I find these helpful with water changes and when adding additives to the aquarium. It is the cheapest method. There are other ways but these can get expensive and complicated to the new hobbyist.

  4. Food safe bucket bucket. This is needed for water changes and food safe comes highly recommended.

  5. Water siphon. Not essential but really helps drain water on water changes.

  6. Glass cleaner. As above but will keep the outside of the glass nice and clean for viewing pleasure.

  7. Scissors, Knife and cutters. These can be used for cutting "frags" of your corals that can then be traded with other reefers.

  8. Storage box or Container. Really useful for keeping test kits, additives and some of the above accessories.
  9. Bucket or suitable container. You will need this for them really important and regular water changes, just empty or drain your water into the bucket

You will be surprised how much these simple items will help you in this fascinating hobby.

Comments

rotem said…
I agree that Algae scraper is essential tool.
unfortunately the back glass is the problem. thanks for sharing.
19 June 2009 at 13:23
Stephanie said…
turkey baster is a wonderful little tool for cleaning off the rock!

thank you for the tip!!!
25 July 2009 at 17:44
Post a Comment

Popular posts from this blog

Vauxhall vivaro movano heater blower motor not working. How to fix, repair

So it’s a cold winters morning your frozen to the bone, you jump into your vauxhall vivaro and turn the heaters on, it doesn’t work. In this article I will explain how to repair. There are commonly three things that can go wrong and it true to be said with most vehicles. These are the fuse, the motor, and or the heater resister. These should be checked in this order. Not only to keep costs down but is a good methodical way to solve the problem. A little contradictory but before you do anything just check if the motor works on any speeds at all. If it does, particularly the fastest speed. It safe to say the fuse and motor are working fine, and would probably mean that heater resister if faulty. If this doesn’t do anything you should grab the owners manual and locate the fuse. This can be checked visually by removing and looking at the fuse element or the use of a power probe and checking a power at both sides of the element. If the heater still doesn’t work, remove the motor a...
3 comments
Read more

TDS and how to get it to zero.

Total dissolved solids, or TDS as it is otherwise known can be the cause of many problems. One of the main problems that it can cause, is nuisance algae like i have had. As you will know from following my blog, i have had major issues with Algae. The RO water with a TDS reading of 9 that was being used woud'nt have helped. So how do you overcome this? Get yourself an in line TDS meter to establish your TDS reading. This meter measures the water before the Reverse Osmosis and pre filter stages. It is not unusual for tap water to have a reading of 300. These meters also indicate the reading after the reverse osmosis process. As expected this should be zero. If like me you have a TDS reading above 0. You will be feeding the nuisance algae. Provided your TDS is quite low, for example around 10 you can be satisfied that your Membrane is in satisfactory working order. If higher or your RO membrane is a few years old you might want to consider membr...
5 comments
Read more

Why is my aquarium full of algae?

Nuisance algae is a problem many reef aquarists encounter. This article will point you in the right direction and more than likely by taking appropriate action to one of the solutions, your algae will disappear and never return. There are three main reasons for hair algae, these are listed in order of most probable cause. Phosphates. This is at large the biggest cause of hair algae. The trouble with phosphates is that most aquarists check the parameter but because most test kits available are inaccurate they get false readings. Giving the impression that phosphates are at an acceptable level. The most reliable test kits to date are the Deltec phosphate test kit, but this is very expensive. The solution is very easy to solve. Use a phosphate adsorbing media such as rowaphos in direct flow in the aquarium. Using a inexpensive phosphate reactor for the media is much more effective and comes highly recommended. Either way ensure you change media every four to six weeks. Water Movement...
5 comments
Read more