Skip to main content

Time to close my reef down.

After much time thinking and debating it has become time for me to close down my reef aquarium. 

Having two children, a full time job and many other hobbies something had to give. I feel my commitment at the moment to my reef is not as it should be.  
Don't get me wrong I still love this hobby but feel it right for the conservation of animals and my commitment to my family it be right to take a break. 

My plan is to sell everything for now. When ready I will at that time in the future purchase the latest technology and  adopt the latest techniques with maybe a custom built aquarium. 

So what will happen with my reef blog?

My reef blog will remain and I will still be spending time on forums and the internet  reefing sites. More importantly trying more to keep readers of this blog up to date with what is happening in the reefing world. 

I would love for the comments to keep coming, keeping the blog alive. Proving to me this blog helps its readers. 

Comments

Post a Comment

Popular posts from this blog

Vauxhall vivaro movano heater blower motor not working. How to fix, repair

So it’s a cold winters morning your frozen to the bone, you jump into your vauxhall vivaro and turn the heaters on, it doesn’t work. In this article I will explain how to repair. There are commonly three things that can go wrong and it true to be said with most vehicles. These are the fuse, the motor, and or the heater resister. These should be checked in this order. Not only to keep costs down but is a good methodical way to solve the problem. A little contradictory but before you do anything just check if the motor works on any speeds at all. If it does, particularly the fastest speed. It safe to say the fuse and motor are working fine, and would probably mean that heater resister if faulty. If this doesn’t do anything you should grab the owners manual and locate the fuse. This can be checked visually by removing and looking at the fuse element or the use of a power probe and checking a power at both sides of the element. If the heater still doesn’t work, remove the motor a
3 comments
Read more

New V2 Auto top up from TMC

After needing an auto top up unit for some time, with quite high costs for a unit that function seems very minimal. I have always been put off until now. Whilst reading ultra marine I saw a review and advertisements for the TMC V2 auto top up and more surprising is it's very affordable price tag. After further investigation it seems to have really good reviews on forums and blogs. I have to say it is a real good, easy to set up and cheap unit that functions perfectly. This should give me more stability and time to enjoy the aquarium.I will in a few weeks report back any improvements that it will hopefully make.
6 comments
Read more

TDS and how to get it to zero.

Total dissolved solids, or TDS as it is otherwise known can be the cause of many problems. One of the main problems that it can cause, is nuisance algae like i have had. As you will know from following my blog, i have had major issues with Algae. The RO water with a TDS reading of 9 that was being used woud'nt have helped. So how do you overcome this? Get yourself an in line TDS meter to establish your TDS reading. This meter measures the water before the Reverse Osmosis and pre filter stages. It is not unusual for tap water to have a reading of 300. These meters also indicate the reading after the reverse osmosis process. As expected this should be zero. If like me you have a TDS reading above 0. You will be feeding the nuisance algae. Provided your TDS is quite low, for example around 10 you can be satisfied that your Membrane is in satisfactory working order. If higher or your RO membrane is a few years old you might want to consider membrane replacement. So your pre
5 comments
Read more